In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can make certain that nothing will leak when you place the mask on. Be sure the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought http://brigada.mk/the-best-affordable-dog-food-finding-the-perfect-type-of-inexpensive-dog-food/ to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so you don’t end up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too big or else it might look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain that the ears are level and make certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll need to do some sanding to be certain it is secure on your dog. You can do it by sanding off any excess paper which might have been removed from your mask.